The titanium alloy grid fin adopts a honeycomb-like winglet structure with a rectangular frame and an internal angle of ±45°, resembling a "flyswatter". This design achieves the following functions through the coordinated work of mult...

Extremely corrosion-resistant Under working conditions where ordinary stainless steel would quickly become perforated, titanium can last for many years Light weight, high strength About 45% lighter than stainless steel, with low installation and suppor...

Clean the furnace chamber Regular cleaning: After each use, wait for the furnace chamber to cool down to below 200℃, then use a soft-bristled brush or vacuum cleaner to remove any residues, to prevent corrosion of the furnace tubes or interference with t...

Material selection: Choose the appropriate tantalum or tantalum alloy material based on the properties of the reactants and reaction conditions. For extremely corrosive media and high-temperature conditions, select high-performance tantalum alloy material...

Material properties: Select the appropriate type based on factors such as viscosity, corrosivity, and presence of solid particles (e.g., titanium is resistant to strong acids and alkalis). Processing capacity: Determine the daily processing capacity (suc...

corrosion resistance The corrosion rate of titanium in strong corrosive media such as hydrochloric acid, sulfuric acid, and seawater is less than 0.01mm/year, which is more than 10 times that of 316L stainless steel. heat resistance Titanium material h...

Pre-operation inspection Structural integrity: Check whether the inlet and outlet pipelines and valve connections are correct, and whether the connecting bolts are tightened to avoid leakage risks. Liquid level control: Open the natural gas outlet valve...

Daily Inspection: Regularly check the jacket for leaks and verify the accuracy of the pressure gauge and thermometer. Cleaning & Maintenance: Clean the inner cylinder with a neutral cleaning agent after the reaction to avoid residual corrosive substa...