Heat exchange process: High-temperature fluid (such as steam) flows in the shell side, while low-temperature fluid (such as liquid) flows in the tube side. Heat is conducted through the wall of the bayonet tube (including both the outer and inner tubes)...

Material properties: Select the appropriate type based on factors such as viscosity, corrosivity, and presence of solid particles (e.g., titanium is resistant to strong acids and alkalis). Processing capacity: Determine the daily processing capacity (suc...

Liquid distribution system: It includes a cloth plate, an upper distributor, and a lower distributor, ensuring uniform distribution of the material liquid to the heating tube and avoiding uneven flow or flow interruption. Heating tube bundle: A verticall...

corrosion resistance The corrosion rate of titanium in strong corrosive media such as hydrochloric acid, sulfuric acid, and seawater is less than 0.01mm/year, which is more than 10 times that of 316L stainless steel. heat resistance Titanium material h...

Start equipment: Activate the heating system: Start the steam generator or electric heating device to preheat the heat exchanger tubes. Establish vacuum (if necessary): Start the vacuum pump to pump the system to the set vacuum level. Start the circula...

Pre-operation inspection Structural integrity: Check whether the inlet and outlet pipelines and valve connections are correct, and whether the connecting bolts are tightened to avoid leakage risks. Liquid level control: Open the natural gas outlet valve...

A U-tube heat exchanger is a shell and tube heat exchange device, whose core working principle is based on the basic physical process of heat exchange, that is, heat transfer is achieved through the flow of two fluids at different temperatures (tube si...

Daily Inspection: Regularly check the jacket for leaks and verify the accuracy of the pressure gauge and thermometer. Cleaning & Maintenance: Clean the inner cylinder with a neutral cleaning agent after the reaction to avoid residual corrosive substa...

On March 15, International Consumer Rights Day, the Wuxi Branch of the Jiangsu Special Equipment Safety Supervision and Inspection Institute (CSEI) officially signed a strategic cooperation agreement with Jiangsu Sinchao Metals Tech Technology Co., Ltd. T...

Recommendation of senior management from Nanya New Materials, we established a genuine collaborative bridge with a key PCB client in Jiangxi. On their production journey, the client encountered a persistent challenge: the laminating steel plates were pron...

At the start of the new year, on the morning of January 7, 2025, we received an exciting announcement. The Singapore government drainage channel project undertaken by Sinchao Metals Tech was successfully delivered, exceeding expectations, and was honored ...

Recently, Secretary-General Dong Bangqi and his delegation from the Copper Clad Laminate Materials Branch of the China Electronic Materials Industry Association visited our company. They had previously met with several leading enterprises in the indust...